PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
122
Picture application
settings menu
The Picture application settings menu shows the available options. (See Figure
111.)
Figure 111: Picture application settings menu
Convert to Rec. 709.
Set to
On
to allow the trace displays to convert camera logs to
Rec. 709 (requires Option MP2-PROD).
NOTE.
Convert to Rec. 709 mode is not supported for SD signals. In full screen mode,
there is no cropping. Pictures are decimated horizontally or vertically to obtain the
correct aspect ratio. This decimation may cause some artifacts.
Format Overlay.
Set to
On
to display the format information on top of the picture.
The placement of the format information window is set by the user through drag
and drop.
Source ID Overlay.
Provides an overlay of the video source on the Picture application.
The source data carries ANC data conforming to SMPTE 291M. The default DID is
0x53 and SDID is 0x49. Set them as required. The source ID is limited to a maximum
15 ASCII characters.
To enable the Source ID Overlay, open the Picture Setting menu and then set the
Source ID Overlay to
On
. Select and drag the overlay to the correct location on the
application.
