![Telestream PRISM MPI2-25 Скачать руководство пользователя страница 105](http://html1.mh-extra.com/html/telestream/prism-mpi2-25/prism-mpi2-25_user-manual_1082244105.webp)
PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
84
CAUTION.
After the instrument has started the upgrade process, DO NO
remove power from the instrument. If you do so, the instrument flash will be
corrupted. The instrument will have to be sent to a Telestream factory service
center to have the system firmware restored.
NOTE.
If power to the instrument is lost before it begins erasing the internal
flash, you can restart the firmware upgrade after the instrument reboots.
Upgrade the
Firmware
1.
Copy the upgrade file with a .bin file extension from the upgrade package
onto a USB memory device. You need approximately 1 GB of available
space on the USB device.
NOTE.
If the upgrade package included a readme.txt file, read the file before
performing the upgrade. The file contains important information about the
firmware release.
2.
Insert the USB memory device into a USB port on the PRISM monitor.
3.
On the PRISM monitor, select the
Settings
icon (
) to open the Settings
menu.
4.
Select
Utilities
to open the Utilities submenu.
5.
Select
Firmware Upgrade
. After the USB device has been scanned, the
display lists all of the files on the USB device with a .bin file extension.
6.
Select the file in the list, and then select
Install
to start the upgrade. (See
Figure 76
.)
Figure 76: Select the firmware upgrade file
7.
While the upgrade is in process, a message box appears stating that the
firmware installation is in progress. (See
Figure 77
.)