Installation
Equipment rack installation
33
PRISM MPS Installation and Safety Instructions
Note:
This instrument is not designed to be powered by AC and DC sources at the
same time. If both power sources are connected, the MPS uses the AC power source.
Note:
If the unit is powered on with two power sources, and you remove the AC
power source, the instrument might shut down and restart. This does not damage the
instrument. The instrument is not designed for a seamless transition between AC and
DC power.
Equipment rack installation
There is an optional accessories kit for the PRISM MPS (MPS-RACK). The accessories kit
includes the
MPS Rack Accessories Installation and Safety Instructions
.
Connectors
This section shows the rear panels of the MPS models. A table with descriptions of each
connector accompanies the examples.
MPS-100
The example shows the rear panel of an MPS-100. The table provides details of each
connector.
