Installation
Initial Product Inspection
27
PRISM MPS Installation and Safety Instructions
Physical Characteristics
Exterior Cleaning
The instrument exterior was inspected for debris when it was shipped. If necessary, you
can clean the exterior of the instrument.
WARNING: To prevent injury or death, power off the instrument and disconnect
it from line voltage before cleaning.
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a soft-bristle brush.
If any dirt remains, use a cloth or swab dipped in a 75% isopropyl alcohol solution. Use a
swab to clean narrow spaces around controls and connectors. Do not use abrasive
compounds on any part of the instrument that may be damaged by it.
CAUTION: Avoid the use of chemical cleaning agents that might damage the
plastics used in the instrument. Use only deionized water when cleaning the
front-panel buttons. For the rest of the instrument, use a 75% isopropyl alcohol
solution as a cleaner and rinse with deionized water. Before using any other type
of cleaner, consult your Telestream service center or representative.
MPS-100/-200/-300 Physical Characteristics of a Bare Instrument
Parameter
Description
Dimensions
Height
Width
Depth (incl.
connectors)
13.30 cm (5.24 in.)
22.00 cm (8.66 in.)
13.70 cm (5.15 in.) for MPS-100 BNC connectors
12.46 cm (4.91 in.) for MPS-200/-300 HD-BNC connectors
Weight
Net
Shipping
2.77 kg (6.1 lb)
4.6 kg (10.1 lb)
