Important Compliance and Safety Information
14
PRISM MPS Installation and Safety Instructions
DANGER
indicates an injury hazard immediately accessible as you read the marking.
WARNING indicates an injury hazard not immediately accessible as you read the
marking.
CAUTION
indicates a hazard to property including the product.
Symbols on the Product
When this symbol is marked on the product, be sure to consult the manual to find out
the nature of the potential hazards and any actions which have to be taken to avoid
them. (This symbol may also be used to refer the user to ratings in the manual.)
The following symbol(s) may appear on the product:
General Safety Product Specific Statements
Use the product only as specified. Review the following safety precautions to avoid
injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally
accepted safety procedures in addition to the safety precautions specified in this
manual. The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the
cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating
correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
WARNING: To prevent injury or death, power off the instrument and disconnect
it from line voltage before cleaning.
ADVERTENCIA: Para evitar el riesgo de lesión o muerte, apague el equipo y
desconéctelo de la toma de corriente antes de limpiarlo.
WARNUNG: Um Verletzungen oder Tod zu vermeiden, schalten Sie das Gerät aus und
trennen Sie es von der Netzspannung, bevor Sie es reinigen.
