BN68-08194Y-02
Reverse Side
1
Connects to MDC using an RS232C adapter.
2
Outputs sound to an audio device via an audio cable.
3
Connect to a USB memory device.
4
-
Wired LAN connection port used to connect an external device
such as a
laptop to connect to the Internet.
-
Connects to MDC using a LAN cable.
5
-
Sends the HDMI signal to a connected LAN cable using an
HDBaseT transmitter.
-
Connects to MDC using a LAN cable.
6
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Issues
Solutions
The screen keeps
switching on and off.
Check the cable connection between
the product and PC, and ensure the
connection is secure.
No Signal
is displayed
on the screen.
Check that the product is connected
correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode
is
displayed.
This message is displayed when a
signal from the graphics card exceeds
the product’s maximum resolution and
frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on the
screen look distorted.
Check the cable connection to the
product.
The screen appears
unstable and shaky.
Check that the resolution and frequency
of the PC and graphics card are set within
a range compatible with the product.
Then, change the screen settings if
required by referring to the Additional
Information on the product menu and the
Standard Signal Mode Table.
There are shadows or
ghost images left on
the screen.
There is no image on
the screen and the
power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Issues
Solutions
Picture quality of the
product is different
from the dealer
shop where it was
purchased.
Use an HDMI cable to obtain high-
definition (HD) picture quality.
The remote control
does not work.
Make sure that the batteries are correctly
in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
A beeping sound is
heard when my PC is
booting.
If a beeping sound is heard when your PC
is booting, have your PC serviced.
The product smells
like plastic.
The plastic smell is normal and
disappears over time.
Small particles are
found on the edges of
the product.
The particles are part of the product
design. The product is not defective.
When I try to change
the PC resolution, a
message
The
defined resolution
is not supported.
appears.
The message
The defined resolution
is not supported.
appears if the input
source resolution exceeds the maximum
resolution of the display.
To resolve the issue, change the PC
resolution to a resolution supported on
the display.
Troubleshooting Guide
Checking the Components
Parts
Contact the vendor where you purchased the product if any
components are missing.
The pictures may look different from the actual components.
1
Remote sensor
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
QUICK SETUP GUIDE
Warranty card
(Not available in some locations)
Power cord
Batteries
(Not available in some
locations)
Remote Control
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
The colour and the appearance may differ depending on the product, and the
specifications are subject to change without prior notice to improve the performance.
Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
OH46F
I
OH55F
QUICK SETUP GUIDE
POWER
BN68-08194Y-02_QSG_OHF 46-55_INDIA_ENG.indd 1
2019-06-28 오후 2:56:49
