TELES CellX 3G-4 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 64

background image

2

System security and hardware overview

Page 13

CELLX box 17.1/002

This chapter starts with the safety and security precautions. Make sure that every-
one who works with the CELLX Box is aware of these precautions. The CELLX Box
described at the end of this chapter.

2.1 Safety and security precautions

Please be sure and take time to read this section to ensure your personal safety and proper
operation of your CELLX Box. To avoid personal injury or damage to the CELLX Box, please
follow all safety instructions before you begin working on your CELLX Box. CELLX Boxes are
CE certified and fulfill the legally specified safety regulations, including EMC (electromagnetic
compatibility) and LVD (low voltage directive) requirements. The manufacturer assumes no li-
ability for consequential damages or for damages resulting from unauthorized changes.

The symbols described on

Chapter "Safety Symbols" on page 5

are used to indicate impor-

tant information and to describe levels of possible danger.

Before you begin to setup the CELLX Box, please take note of the following advice.

2.2 System

security

This section describes all points crucial to the CELLX Box’s system security.

2.2.1 Transport

Disconnect all cables before moving the CELLX Box. As a protection against jolts and impact,
this device should be transported in its original packaging only.
Condensation can occur if the device is brought from a cold environment into the room
where it is to be operated. The device must be absolutely dry prior to being operated. Accord-
ingly, an acclimatization period of at least two hours is required.

2.2.2 Operating

conditions

The CELLX Box’s location must support normal operation in accordance with EN ETS 300 386.
Make sure you install the system in a clean, dry, dust-free location. If possible, use an air-con-
ditioned site.

Do not subject the device to direct sunlight.

Danger of electric shock - do only use the power supply included in delivery. Do not use a bro-
ken power supply. The power supply run on 110 V.

Bear in mind that telephone and WAN lines are also energized and can cause electric shocks.

Wire your system using only the cables included in the package contents. Use only proper Eth-
ernet cables.

Do not insert foreign objects into openings in the device. Conductible objects can cause short-
circuiting that results in fire, electric shock, or damage to the device.

Never work on the CELLX Box or connect or disconnect cables during a thunderstorm.

Do not open the CELLX Box or its power supply. Changes in the device are not permitted.

Be sure to respect country-specific regulations, standards or guidelines for accident preven-
tion.

Tips for EMC Protection: Use shielded cables. Do not remove any housing components. They
provide EMC protection.

i

i

«
...
11
12
13
14
15
...
»

Содержание CellX 3G-4

































































Отзывы:

Нет отзывов

Похожие инструкции для CellX 3G-4

Бренд: ICP DAS USA Страницы: 85

Бренд: ICP DAS USA Страницы: 6

Бренд: ICP DAS USA Страницы: 107

Бренд: ICP DAS USA Страницы: 8

Бренд: ICP DAS USA Страницы: 12

Бренд: Yamaha Страницы: 30

Бренд: R volution Страницы: 24

Бренд: Magtek Страницы: 54

Бренд: SAJ Страницы: 59

Бренд: CEL-MAR Страницы: 12

samlexsolar SPB-EXPLORE200

Бренд: Samlexpower Страницы: 2

Бренд: Allied Telesis Страницы: 52

Бренд: Tektronix Страницы: 211

Бренд: Conceptronic Страницы: 7

Бренд: Stanley Страницы: 7

Бренд: Miteq Страницы: 55

Бренд: Gyrus Acmi Страницы: 60

NetworkHD 100 series

Бренд: Wyrestorm Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды