Telecell Installation Manual
Introduction
TL-006175-PR Issue 5 © Telensa Ltd 2018
Page 7
1.2
General Warnings and Cautions
This section provides safety and regulatory warnings, cautions and information for the
Telecell and its internal components. Details of manufacturer's source documents are
noted where they are used.
Installers must be suitably trained and qualified for electrical work, according to the laws
and local codes for the locality and country where the unit will be installed. This unit must
only be installed by personnel that have been trained by Telensa or their representatives to
carry out this work.
The supply voltage present in the luminaire and its plug in locking type socket is hazardous
and all necessary precautions must be taken to ensure the safety of the installer. Isolate
the supply to the plug in locking type socket before removing an old photocontrol, and
installing the Telecell.
The transmitter must not be co-located or operated with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm from
bystanders.
1.3
Packing and Handling Instructions
Telecells are electronic devises containing processors, a radio module and memory.
Although encased in a robust outer shield, Telecells should be treated with care.
Dropping the Telecell from a height could cause irreparable damage.
Ensure that pins are protected, remaining in their original packaging and kept dry during
transportation and installation.
If returned to Telensa, Telecells must be packaged to the same standard prior to shipping.
