Telecell Installation Manual
Commissioning
TL-006175-PR Issue 5 © Telensa Ltd 2018
Page 23
3.3.2
Set Location
Once the assets are imported it is necessary to set the location sources for both the
Telecell and Asset.
1)
Go to
Edit Assets Configuration
>
Gateway
>
Assets
>
Asset Details
:
2)
Select the
Assets
.
3)
Click
Edit Locations
.
4)
Select
Copy imported Element locations
(Assets location source).
5)
Select
Use Telecell GPS locations
(Telecells location source).
6)
Click
OK
.
Latitude
and
Longitude
contained within the Asset details page and the Telecell page is
derived from the data uploaded to PLANet from the Mayrise hand held devices.
Whereas,
GPS Latitude
and
GPS Longitude
displayed on the Telecell page is generated by the
Telecell during authentication when connecting to the Basestation.
Note:
The
Assets location source
alternative:
No change
, is used if the location data to be
used is predefined and already loaded into PLANet.
Note:
The
Telecell location source
alternative:
Copy imported Element locations
is used in
combination with a specific mobile deployment tool, which provides the GPS location
during deployment.
Note: Copy Telecell GPS locations
would only be selected if no location data is imported from
a CMS system to the PLANet system.
