Telecell Installation Manual
Introduction
TL-006175-PR Issue 5 © Telensa Ltd 2018
Page 12
o
The OSID has the following format 0001234567-xx where xx are check
digits for the actual number
The Telecell serial number
The Telecell is supplied with three identical labels. These are intended for use as follows:
To attach within or outside the luminaire. Inside somewhere clearly visible is
recommended if possible.
Note:
avoid locations that will get too hot.
To attach to a suitable tag (located in the base of the column).
To attach to installation documentation (see section 3.6). Typically, this will be a
sheet with asset IDs and a space next to each to attach the label from the
associated Telecell.
It is very important that installation sheets are completed accurately and returned promptly
to the operation centre. This is to ensure that the association between the Telecell and the
column can be added to the system.
Note:
The system cannot operate properly without this.
When used with asset management systems that provide this facility, Telecell IDs and the
matching column reference may be captured using PDAs or similar. The Telecell and
Column IDs can then be loaded electronically into the asset management system, and
from there into PLANet.
Note:
This removes the need to manually match the Telecell and column IDs on the PLANet
system.
