TeleMann DTR4000CA, Руководство пользователя

Страница: 21 / 24

DTR4000CA Factory Default Satellite Information
Enter your PIN, then press OK to confirm it. Then submenus will appear, which
allows you to change the preferences that were set factory default values. You
can also add features to the existing selections.
LNB Configuration
LNB Configuration helps you enter information of LNB that is connected to
DTR4000CA
In Installation menu, select LNB Configuration. Then the following screen
pops up
LNB Names Selects one LNB out of eight LNBs
LNB Frequency(KHz) Either you can select predefined LNB Frequency by
Left/Right keys or manually enter a specific
frequency in KHz unit.
0V/12V Antenna Switch Depending on the use’s antenna switch box, you can
pick up either 12V by setting “On” or 0V by setting
“off”
LNB Power Depending on the use’s antenna LNB, you can supply
either LNB power by setting “On” or not by setting
“off”