TeleMann DTR4000CA, Руководство пользователя

Страница: 7 / 24

DTR4000CA Hardware Description
Hardware description
Here, you will be given the explanation of the front and rear panel of DTR4000CA. Each of
display, ports, connections will be explained.
Front Panel Configuration
1 LED DISPLAY
This shows the channel number or other information as follows :
During power is off, the dash ‘-‘ will be displayed at each digit, which
indicates that your DTR4000CA is in stand-by mode. Immediately after your
decoder turns on, ‘C . . .’ will light up at each digit, which means that your
DTR4000CA is ready to operate.
If your DTR4000CA locks a channel, its channel number will be displayed.
Whenever you change the channel, the number of the changed channel will be
displayed.
2 REMOTE SENSOR
It receives the infrared signal from Remote Control and operates your
DTR4000CA.
3 Smart Card and/or PCMCIA Card Slot (Option), or Not Used
These two slots can be used either for Conditional Access System with Smart
card, or Common Interface Module with PCMCIA card, or may not be used at
all in case of free-to-air only set-top-box according to the option configuration