TeleMann DTR4000CA, Руководство пользователя

Страница: 9 / 24

DTR4000CA Hardware Description
Rear Panel Configuration
The following diagram shows the DTR4000CA with analog board. Here the dotted line can be
replaced with the Modem board (option) below.
1 LNB IN
Satellite antenna input terminal. The LNB power (14/18V) and the switching
signals (22KHz/DiSEqC) are also supplied to LNB through this terminal.
2 LNB OUT
It is for connecting another STB to your DTR4000CA. Connect this terminal
to LNB IN terminal of the other STB via RF cable.
3 RS-232 serial port
An operator for customer services can use this port for the transmission of the
preprogrammed channel information from a PC to the DTR4000CA. Or this
port can also be used for main board testing and software upgrading.
4 AUDIO L/R output terminals
Connect these terminals to audio L/R input terminals of TV, VCR, or Hi-Fi
audio system.
5 VIDEO output terminal
Connect this terminal to video input terminal of TV or VCR.
6 S-VIDEO output terminal