TeleEye JN308, Руководство пользователя

Страница: 44 / 80

36
Receive address: Receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the
validity of the mailbox.
Attaching image: After selecting it, the system will attach images when sending the emails.
Fig 4-31 Network Configuration-Email
4.6.4 Server
This function is mainly used for connecting ECMS. The setting steps are as follows:
Step 1: In the server tab, select “enable” as shown in the Fig 4-32.
Step 2: Check the IP address and port of the transfer media server in the
ECMS. The default server port for auto report is 2009. If it is modified,
please enter into the transfer media interface to check.
Step 3: Enable the auto report in the ECMS when adding a new device.
Then input the remaining information of the device in the ECMS. After that,
the system will auto allot a Device ID. Please check it in the ECMS.
Step 4: Input the above-mentioned server IP, server port and device ID in
the server interface .Then click “Apply” button to save settings. Now, the
ECMS system will automatically connect this device. Fig 4-32 Network Configuration-Server
4.7 User Management Configuration
This tab allows you to add normal or advanced users. To add user and setup user authority:
Step 1: Enter into Menu
Setup User management configuration. Refer to Fig 4-34:
Step 2: Click Add button to display a dialog box as Fig 4-35:
Step 3: In General tab, input username, password and select user type. You can also check ‘Binding PC MAC Address’ and
input this address.
Step 4: Click ‘OK’ button to save settings.