TeleEye JN308, Руководство пользователя

Страница: 28 / 80

21
Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup.
VGA resolution: The resolution of live display interface, ranges from: CVBS, VGA800*600, VGA1024*768, VGA1280*1024
and HDMI.
Note
：
Switching between HDMI/VGA and CVBS will change the menu output mode. Please connect to relevant monitor.
Language : To setup the menu language.
Note: After changing the language and video output, the device needs to login again.
Logout After (Minutes): You can setup the screen interval time (30s, 60s, 180s,
300s). If there is not any operation within the setting period, the device will auto
logout and return to the login interface.
No Image When Logout:
If selected, there will be no image showing when logout.
4.1.2 Date & Time
Step1: Enter into Menu Setup Basic Date & Time tab. Refer to Fig 4-4:
Step2: Set the date format, time format, time zone in this interface; checkmark
“sync time with NTP server” to refresh NTP server date; user can also adjust
system date manually
Step3: Click “Default” button to restore default setting; Click “Apply” button to save
the setting; click “Exit” button to exit the current interface. Fig 4-4 Basic Configuration-Date &Time
4.1.3 DST
Step1: Enter into Menu Setup Basic DST interface. Refer to Fig 4-5:
Step2: In this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc.
Step3: Click “Default” button to restore default setting; Click “Apply” button to save the setting; click “Exit” button to exit the
current interface.