TeleEye JN308, Руководство пользователя

Страница: 32 / 80

25
4.3.2 Record Bitrate
Step1: Enter into Menu Setup Record Record Bitrate tab. Refer to Fig 4-12:
Fig 4-12 Record Configuration-Record Bit rate
Step2: Setup rate, resolution, quality, encode and max bit stream
Step3: Click “Default” button to restore default setting; Click “Apply”
button to save the setting; click “Exit” button to exit the current
interface.
4.3.3 Time
Step1: Enter into Menu Setup Record Time tab. Refer to Fig 4-13:
Pre-alarm record time: The record time prior to actual triggering of an
alarm i.e. record time before motion detection or a sensor alarm was
triggered. Fig 4-13 Record Configuration-Time
Post-alarm record: Set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s
and 300s.
Expire time: The time till which the records would be retained. If the set date is overdue, the recorded files will be deleted
automatically.
Step2: Select “All” to setup all channels with the same parameters.
Parameter Meaning
Rate Range from: 1-30
（
NTSC
）
1-25(PAL)
Resolution Support CIF, HD1, D1 and WD1
Quality
The higher the value is, the clearer the
recorded image is. Six options: lowest,
lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit
stream
Range from: 768kbps-2560kbps