TeleEye JN308, Руководство пользователя

Страница: 18 / 80

18
Item Name Description
7 LAN Network port
8 VGA port VGA output, connect to monitor
9 USB Mouse port Connect to USB mouse
10 HDMI port Connect to high-definition display device
11 ALARM IN Connect to external sensor1-16
12 ALARM OUT 4 CH relay output. Connect to external alarm.
13 GND Grounding
14 P/Z Connect to Speed Dome, Y is TX+, Z is TX-
15 K/B Connect to Keyboard, A is TX+, B is TX-
16 E-SATA Connect to HDD for backup
17 LOOP OUT For outputting 1-16 CH image independently
2.4 Remote Controller
It uses two AAA size batteries.
•
Open the battery cover of the Remote Controller.
•
Place batteries. Please take care of the polarity (+ and -).
•
Replace the battery cover.
Note: Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
4. Check the ID of the remote controller with respect to the DVR.
If it still doesn't work, please try using a good known remote, or contact your dealer.