Teledyne waverunner mxi-a series Скачать руководство пользователя страница 125 | Manualshive

Страница: 125 / 128

Teledyne waverunner mxi-a series Скачать руководство пользователя страница 125

Getting Started Manual

922138-00 Rev A

117

B

successors, executors, heirs, representatives, administrators and assigns of the
parties hereto.

8.6.

Notices

. All notices or other communications between Teledyne LeCroy and

you under this EULA will be in writing and delivered personally, sent by
confirmed fax, by confirmed e-mail, by certified mail, postage prepaid and
return receipt requested, or by a nationally recognized express delivery
service. All notices will be in English and will be effective upon receipt.

8.7.

Headings

. The headings used in this EULA are intended for convenience

only and will not be deemed to supersede or modify any provisions.

8.8.

Acknowledgment

. Licensee acknowledges that (a) it has read and

understands this EULA, (b) it has had an opportunity to have its legal counsel
review this EULA, (c) this EULA has the same force and effect as a signed
agreement, and (d) issuance of this EULA does not constitute general
publication of the Software Product or other Confidential Information.

Windows

®

License Agreement

Teledyne LeCroy's agreement with Microsoft prohibits users from running
software on Teledyne LeCroy X-Stream oscilloscopes that is not relevant to
measuring, analyzing, or documenting waveforms.

«
...
123
124
125
126
127
...
»

Содержание waverunner mxi-a series

































































































































Отзывы:

Нет отзывов