Teledyne T3PS3000, Быстрый старт

Страница: 25 / 42

2.8 Timer
The timer works in the Independent output mode, and can save five timing
setups, each of which is independent from the others. You can set any
voltage/current value that is within the range of the instrument. The timer
supports consecutive output, and the longest time of each group is 10000s.
Set Up Timer
1. Press “TIMER” to enter the Timer Setup interface. The indicator light
turns on immediately.
2. Press the “1” or ”2” button to select the desired channel.
3. Press the direction button to move the cursor to the desired parameter
(voltage/current/time).
4. Set the corresponding value using the “Fine” button and multi-function
knob.
5. Press “Timer” again to exit the interface.
Quick Start 19