Teledyne Everywhereyoulook WAYFINDER Скачать руководство пользователя страница 8

Страница: 8 / 34

P/N 95P-6001-00 (October 2020)

Wayfinder DVL Guide

Page 4

EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.

Connecting to the Wayfinder

To establish communications with the Wayfinder using the Wayfinder Tools app:

1.  Connect the Wayfinder cable to the computer’s serial port.
2.  Apply +12 to 36VDC power (24 VDC typical) power to the system.
3.  Start the Wayfinder Tools app using the desktop shortcut.
4.  Select the

Port

the cable is connected to and set the

Baud

rate

to 115200 (default setting).

5. Click the

Connect

button. As soon as you connect to the

system using Wayfinder Tools, the system begins pinging.

Testing the Wayfinder System

You should test the Wayfinder DVL

•

When you first receive the system.

•

Before each deployment or every six months.

•

When you suspect instrument problems.

•

After each deployment.

To test the Wayfinder

1.  Connect the Wayfinder cable to the computer’s serial port.
2.  Apply +12 to 36VDC power (24 VDC typical) power to the system.
3.  Start the

Wayfinder Tools

app.

4. Click on the Diagnostics tab.
5. Click the

Run tests

button.

6. If all the tests pass, the Wayfinder is functioning normally.
7. If any of the result shows fail, contact TRDI Field Service for more information.

Caring for the Wayfinder System

This section contains a list of items to be aware of every time handling, using, or deploying the Wayfinder.

Please refer to this list often

•

Never set the Wayfinder on a hard or rough surface. This may leave an indentation in the ure-

thane, damage the urethane face, or scratch the anodized finish.

•

Do not expose the Wayfinder to prolonged sunlight (24 hours or more). The urethane face may

develop cracks. Cover the Wayfinder if it will be exposed to sunlight.

•

Do not store the Wayfinder in temperatures over 60 degrees C or under -25 degrees C. The inter-

nal components and/or urethane face may be damaged.

•

Do not connect other metal to the Wayfinder. Other metals may cause corrosion damage. Isolat-

ing bushings must be used when mounting the Wayfinder to a metal structure.

Содержание Everywhereyoulook WAYFINDER



































Результаты поиска

Содержание Everywhereyoulook WAYFINDER

Отзывы:

Похожие инструкции для Everywhereyoulook WAYFINDER

Бренды по названию

Популярные бренды

Teledyne Everywhereyoulook WAYFINDER, Руководство пользователя

Результаты поиска

Содержание Everywhereyoulook WAYFINDER

Отзывы:

Похожие инструкции для Everywhereyoulook WAYFINDER

Бренды по названию

Популярные бренды