Teledyne BDS 3000, Руководство по эксплуатации

Страница: 18 / 100

Introduction BDS 3000
Teledyne Analytical Instruments
4
•
Up & Down Arrows
Increment or decrement values of
functions currently displayed.
• Enter Moves VFD display on to the next
screen in a series. If none remains,
returns to the
Analyze
screen.
•
Escape
Moves VFD display back to the
previous screen in a series. If none
remains, returns to the Analyze
screen.
Digital Meter Display:
The meter display is a Light Emitting Diode
(LED) device that produces large, bright, 7-segment numbers that are
legible in any lighting. It produces a continuous readout from 0-999.9
ppb and then switches to a continuous ppm readout from 0-100.00 ppm.
It is accurate across all analysis ranges without the discontinuity inherent
in analog range switching.
Alphanumeric Interface Screen:
The VFD screen is an easy-to-use
interface from operator to analyzer. It displays values, options, and
messages that give the operator immediate feedback.
Flowmeter:
Monitors the flow of gas past the sensor. Readout is 0.1 to
2.0 standard liters per minute (SLPM) of nitrogen
Standby Button:
The
Standby
turns off the display and outputs, but
circuitry is still operating.
CAUTION: THE POWER CABLE MUST BE UNPLUGGED TO
FULLY DISCONNECT POWER FROM THE
INSTRUMENT. WHEN CHASSIS IS EXPOSED OR
WHEN ACCESS DOOR IS OPEN AND POWER
CABLE IS CONNECTED, USE EXTRA CARE TO
AVOID CONTACT WITH LIVE ELECTRICAL
CIRCUITS.
Access Door:
For access t o the BDS S ensor , the front panel swi ngs open
when the l at ch in t he upper r ight corner of t he panel i s pressed al l the way
i n wi th a nar row gauge t ool . Accessi ng the mai n cir cuit boar d requir es
unf astening rear panel screws and sl i di ng t he uni t out of the case.