manualshive.com logo in svg

Teledyne BDS 3000, Руководство по эксплуатации

Поделиться
Скачать
Teledyne BDS 3000 Скачать руководство пользователя страница 61

Oxygen Analyzer

Operation

Teledyne Analytical Instruments

47

lOffset[2] = 2327

(ADC count of offset of the third
gain of sensor amplifier)

lOffset[3] = 2330

(ADC count of offset of the fourth
gain of sensor amplifier)

Fourth Screen:

tempOffset  = 2190

 

(ADC count of offset of

temperature amplifier)

Current_gain=    1

(current gain of sensor amplifier on
span gas)

4.3.11   Temperature

The temperature of the sensor is displayed on the third screen or

system menu, and is shown in degrees centigrade. If sensor cable is
disconnected, the display will show either “> 50” or “ < 0”.

4.3.12  Extended Analog Output Function

To access this function, press the 

SYSTEM

 key to enter it’s menu.

Select the 

More

 function to move on to the second screen of the 

system

menu.

Version

 Diag  Xout

Neg-Y  Filter-10 More

Select 

Xout

 and press

 ENTER

 to get to the extended output setup

menu.

Output Offst: 10% FS

Neg. Analog Offset

The number on the first line is adjustable using the Up and Down

keys between 0 and 50. This function makes it possible to track negative
readings in the analog output, since the analog outputs do not go below
zero volts or 4 mA DC. Provided that negative readings are allowed (
this is set in the system menu as well ).

If the value is set to zero of FS (full scale), the analog outputs work

in standard form and this is the default.

Содержание BDS 3000





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды