manualshive.com logo in svg

Teledyne 440, Системное руководство, Страница: 78 / 256

Поделиться
Скачать
Teledyne 440 Скачать руководство пользователя страница 78

5 – Operating Software

5-12

© Teledyne TSS

DPN 402196 Issue 4.1

View

Run Window
[Ctrl + R]

Select this command to open or close the DeepView Run Window. You 
may resize and move the Run Window on the SDC screen after you open 
it. The normal condition is for the Run Window to be closed when you 
start DeepView. A button on the DeepView for Windows toolbar performs 
the same function as this command.

Forward Search Win-
dow [Ctrl + F]

This command is valid only when you use DeepView for Windows to con-
trol a 350 or 350 Powertrack System. It is not available when you use the 
software with a 440 alone

Toggle Height Scale 
[Ctrl + H]

Use this command to modify the available selection of displayable vertical 
ranges. The vertical ranges vary between the 440 and the 440 systems 
and are as follows:

440 mode: 0m to 2m, 5m, 15m or 30m

440 mode: 0m to 2m and 0m to 5m.

Toggle Swath Width 
[Ctrl + W]

Use this command to alter the swath range for the 350 or 350 Powertrack 
system. This command is unavailable to the 440 system, which has a 
fixed swath range of 0m +/-2m. The available ranges of the 350 or 350 
Powertrack system are 0m +/-2m, 0m to +/-5m and 0m to +/-15m.

Scope and Spectrum 
Analyser Window

Use this command to open or close the Scope and Spectrum Analyser 
Window. A button on the DeepView for Windows toolbar performs the 
same function as this command. 
You must close the Run Window (or Forward Search Window on a 350 
system) before you can access this command using either the menu or 
the toolbar button. 
The normal condition is for the Scope and Spectrum Analyser Window to 
be closed when you start DeepView for Windows.
Note that the data string transmitted from the SEP to the SDC 
extends significantly in length when you open the Scope and Spec-
trum Analyser Window. This will reduce the data update rate. You 
should therefore keep this window closed unless you require it.

System Errors Window

Use this command to open or close the System Errors Window described 
in 

section 5.3.2.5 "System Errors Window" on page 5-18

. A 

button on the DeepView for Windows toolbar performs the same function 
as this command. The normal condition is for the System Errors Window 
to be closed when you start DeepView for Windows.

Terminal Window
[TAB]

Use this command to open or close the Terminal Window described in 

section 5.3.2.6 "Terminal Window" on page 5-19

. A button on 

the DeepView for Windows toolbar performs the same function as this 
command. The normal condition is for the Terminal Window to be closed 
when you start DeepView for Windows.

Video Overlay Enable
[Ctrl + V]

Use this command to select the Video Overlay function. A button on the 
DeepView for Windows toolbar performs the same function as this com-
mand. The video overlay feature allows the SDC to accept input from a 
video camera and to output the video image overlaid with the target co-
ordinates and steering information.

Table 5-1: DeepView Menu Commands (Continued)

Menu 
item

Sub-menu, 
[hot key access]
and Function key

Description

Содержание 440

































































































































































































































































Отзывы:

Нет отзывов