TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, Руководство пользователя

Страница: 48 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
42 NPO80GB
Revision F.1
Menu Value displayed
Entry V Internal value of the main sensor's signal.
Signal V Main signal in volts.
Meas CH1 V Signal from the ANA1 sensor in volts.
Meas CH2 V Signal from the ANA2 sensor in volts.
Temp I °C Internal temperature within the housing.
Temp C °C Temperature of the main sensor.
Supply V Supply voltage to the terminals of the OLCT 80.
Ref V Internal reference voltage (normally 2.5 V).
1V25 V Internal reference voltage (normally 1.25 V).
User rate % Wear rate of the main sensor. A value of 50% represents a 50% loss of sensitivity. The sensor
must be replaced once a 75% wear rate is reached. This value is recalculated after each
calibration.
Output mA Output current value at the OUT pin (see Figure 5, 2).