TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, Руководство пользователя

Страница: 25 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
NPO80GB
Revision F.1
19
Setting Menu See page
ANA1 sensor – on/off PROG. > PG SENSOR > PG ANA1 > Zero in V 27
ANA1 sensor – slave number PROG. > PG SENSOR > PG ANA1 > Gamme 37
ANA1 sensor – decimal places in display PROG. > PG SENSOR > PG ANA1 > Zero in V 27
ANA1 sensor – reading integration time PROG. > PG SENSOR > PG ANA1 > Gamme 27
ANA1 sensor – units PROG. > PG SENSOR > PG ANA1 > Zero in V 27
ANA2 sensor
Refer to the section above on the ANA1 sensor as the information is similar.
Calibration gas
Calibration gas – define the value CALIBRA > Cal sens. > Calib. Gas 44
Time
Time DATE TIME 22
LCD
LCD backlighting PG SERIE > Back On/Off 37
Current reading (value, reading type, unit) AFF.MES 21
Password
Password – change PROG > PG PASSW > chgt 40
Serial number, etc.
Transmitter serial number INFO > N° 48
Software version number INFO > Ver GB 48
Alarm #1 - main sensor
Alarm #1 – activate PROG. > PG AL/REL > AL SENSOR > AL1 YES/NO 31
Alarm #1 – acknowledge PROG. > PG AL/REL > AL SENSOR > Acq
auto/manu 31
Alarm #1 – assign to a relay PROG. > PG AL/REL > AL SENSOR > Rel
R1/R2/NONE 31
Alarm #1 – increasing/decreasing PROG. > PG AL/REL > AL SENSOR > AL1 incre
/decre 31
Alarm #2 - main sensor
Alarm #2 – activate PROG. > PG AL/REL > AL SENSOR > AL2 YES/NO 31
Alarm #2 – acknowledge PROG. > PG AL/REL > AL SENSOR > Acq
auto/manu 31
Alarm #2 – assign to a relay PROG. > PG AL/REL > AL SENSOR > Rel
R1/R2/NONE 31
Alarm #2 – increasing/decreasing PROG. > PG AL/REL > AL SENSOR > AL2 incre
/decre 31
Alarms #1 and #2 - ANA1 and ANA2
sensors
Refer to the
Alarm #1 and Alarm #2
settings for the main sensor, since the information is similar.
Alarm relay #1
Relay #1 – internal/external PROG. > PG AL/REL > REL 1 > R1 intern/extern 35
Relay #1 – horn-duration PROG. > PG AL/REL > REL 1 > D. Maint s 35