Teledyne Lecroy WaveSurfer 10, Руководство по началу работы

Страница: 25 / 46

USER INTERFACE 21
Front Panel
Most of the front panel controls duplicate functionality available through the
touch screen display. They are covered in more detail in the Basics section
and in the WaveSurfer 10 Oscilloscopes Operator’s Manual . Below are a few
useful front panel controls.
Auto Setup turns on and configures all channels with a signal attached.
An edge trigger is set to the signal mean level.
Clear Sweeps resets math and measurement counters.
The Print button captures the entire screen and handles it according to
your Hardcopy setting (print to file on USB drive, create LabNotebook
entry, etc.).
The
Intensity knob controls the Trace Intensity. Pushing the knob
toggles between WaveStream display mode and regular intensity. In
WaveStream mode, the knob controls trace color saturation.
The
Adjust knob changes the value in any highlighted data entry field
when turned. Pushing the Adjust knob toggles between coarse (large
increment) or fine (small increment) adjustments.
The
Touch Screen button enables or disables touch screen functionality.
Most knobs on the front panel function one way if turned and another if
pushed like a button. The top label describes the knob’s principal “turn” action,
while the bottom label describes its “push” action.
Many front panel buttons light to indicate the function is active.
A
B C
D
E
F
A
B
C
D
E
F