Teledyne Lecroy FrontLine Harmony Скачать руководство пользователя страница 41

Страница: 41 / 59

Frontline Harmony Hardware & Software User Manual

LL/DDI/ADV/BV-34-C

Tests that an advertiser IUT can report the TX Power in advertisements with

RF path compensation using correct payload fields timing and channel

sequence for the maximum time allowed

LL/DDI/ADV/BV-35-C

Tests that an advertiser IUT can support multiple advertising sets with the

correct payload fields timing and channel sequence for the maximum time

allowed. Advertisements with the minimum data required to be supported

are tested

LL/DDI/ADV/BV-39-C

Connectionless CTE Advertising – Maintain CTE Configuration

LL/DDI/ADV/BV-43-C

Periodic Advertising validating SyncInfo fields

LL/DDI/ADV/BV-45-C

Tests that an advertiser IUT sends scannable ADV_EXT_IND PDUs with the

AuxPtr field referring to a valid AUX_ADV_IND PDU on the secondary

advertising channel with the correct payload fields, timing, and channel

sequence for the maximum time allowed. Tests that an advertiser IUT

responds to a scan request on the secondary channel and continues

advertising after the response. Scan response data chaining is tested.

Undirected and Directed events are tested.

LL/DDI/ADV/BV-47-C

Tests that an advertiser IUT using LE 1M PHY sends non-connectable

ADV_EXT_IND PDUs with the AuxPtr field referring to a valid AUX_ADV_IND

PDU on the secondary advertising channel with the correct payload fields,

timing, and channel sequence for the maximum time allowed.

Advertisements with and without data, along with chaining, are tested.

Undirected and Directed events are tested.

LL/DDI/ADV/BV-48-C

Tests that an advertiser IUT using LE Coded PHY sends non-connectable

ADV_EXT_IND PDUs with the AuxPtr field referring to a valid AUX_ADV_IND

PDU on the secondary advertising channel with the correct payload fields,

timing, and channel sequence for the maximum time allowed.

Advertisements with and without data, along with chaining, are tested.

Undirected and Directed events are tested.

LL/DDI/ADV/BV-49-C

Tests that an advertiser IUT using LE 2M PHY sends non-connectable

ADV_EXT_IND PDUs with the AuxPtr field referring to a valid AUX_ADV_IND

PDU on the secondary advertising channel with the correct payload fields,

timing, and channel sequence for the maximum time allowed.

Advertisements with and without data, along with chaining, are tested.

Undirected and Directed events are tested.

LL/DDI/ADV/BV-50-C

Extended Advertising, Legacy PDUs, Undirected, CSA #2

LL/DDI/ADV/BV-51-C

Extended Advertising, Scannable – without ADI – LE 2M PHY

LL/DDI/ADV/BV-52-C

Extended Advertising, Scannable – with ADI – LE 2M PHY

LL/DDI/ADV/BV-53-C

Extended Advertising, Scannable – without ADI – LE Coded PHY

LL/DDI/ADV/BV-54-C

Extended Advertising, Scannable – with ADI – LE Coded PHY

LL/DDI/ADV/BV-55-C

Extended Advertising, Periodic Advertising – LE 2M PHY

LL/DDI/ADV/BV-56-C

Extended Advertising, Periodic Advertising – LE Coded PHY

LL/DDI/SCN/BI-01-C

Tests that a scanner IUT ignores advertising indication packets with invalid

CRC's

LL/DDI/SCN/BI-02-C

Tests that a scanner IUT ignores data in advertising packets with invalid

checksums

Содержание FrontLine Harmony




























































Результаты поиска

Содержание FrontLine Harmony

Отзывы:

Похожие инструкции для FrontLine Harmony

Бренды по названию

Популярные бренды

Teledyne Lecroy FrontLine Harmony, Руководство пользователя

Результаты поиска

Содержание FrontLine Harmony

Отзывы:

Похожие инструкции для FrontLine Harmony

Бренды по названию

Популярные бренды