TELEDYNE API T100U, Дополнение к руководству по эксплуатации

Страница: 49 / 66

Appendix C
Warranty/Repair Questionnaire
T100U, M100EU
(05930B DCN5798)
TELEDYNE API CUSTOMER SERVICE
Email: api-customerservice@teledyne.com
PHONE: (858) 657-9800 TOLL FREE: (800) 324-5190 FAX: (858) 657-9816
C-1
CUSTOMER: _________________________________ PHONE: __________________________________________________
CONTACT NAME: ____________________________ FAX NO. __________________________________________________
SITE ADDRESS: _________________________________________________________________________________________
MODEL SERIAL NO.: _______________________ FIRMWARE REVISION: _____________

_______________________
1. ARE THERE ANY FAILURE MESSAGES? _______________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
2. PLEASE COMPLETE THE FOLLOWING TABLE: (NOTE: DEPENDING ON OPTIONS INSTALLED, NOT ALL TEST
PARAMETERS BELOW WILL BE AVAILABLE IN YOUR INSTRUMENT)
Parameter
*IF OPTION IS INSTALLED
Recorded Value Acceptable Value
RANGE PPB/PPM 0-500 PPB Standard
STABIL PPB

0.3 PPB with ZERO AIR
STABIL2 PPB <= 1 PPB with ZERO AIR
PRESS IN-HG-A AMBIENT (- 2) IN-HG-A
SAMPLE FLOW cm
3
/MIN 650 ± 10%
PMT SIGNAL WITH
ZERO AIR
mV -20 TO 150 mV
PMT SIGNAL AT
SPAN GAS CONC
mV
PPB/PPM
0-5000 mV
0-20000 PPB
NORM PMT AT SPAN
GAS CONC
mV
PPB/PPM
0-5000 mV
0-20000 PPB
UV LAMP
mV 2000 TO 4000 mV
UV STAB
mV < 15mV
LAMP RATIO
mV 30 TO 120%
STR. LGT
PPB ≤ 100 PPB/ ZERO AIR
DARK PMT
mV 200-325
DARK LAMP
mV -50 TO 200 mV
SLOPE
1.0 ± 0.5
OFFSET
mV < 250 mV
HVPS
V ≈ 400 – 800
RCELL TEMP
ºC 50ºC ± 1
BOX TEMP
ºC AMBIENT ± 5
PMT TEMP
ºC 9.5ºC ± 2º CONSTANT
IZS TEMP*
ºC 50ºC ± 1
ETEST
mV 2000 mV ± 1000
OTEST
mV 2000 mV ± 1000
Values are in the Signal I/O
REF_4096_MV
mV 4096mv±2mv and Must be Stable
REF_GND
mV 0± 0.5 and Must be Stable
06840B DCN6201