23
Function setting
Function
Explanation
ON. As long as the correct signal received again, remote
can be operated without rebooting.
When you select "
Power-Off
" (Shutdown), it means that
the Main relay will be OFF (non-conducting). You will
need to reboot the remote system to continue operating.
This function will be activated only if the range exceeds
the maximum remote control distances or the remote has
been disturbed more than 0.5 seconds
AUTO OFF (RX)
This function refers to turn off receiver after a given idle
t i me . R ec e iver MAI N r e la y w il l b e t ur ne d of f
automatically. Normally this function is cooperated with
"non-continuous transmitting" mode to prevent any
unintentional radio.
Channel setting
Operating frequency of your remote control.
There are CH:XX to CH:XX available, user is allowed to
select any channel which is the smallest interference
channel to operate.
