19
c)
Turn the rotary switch (KEY) to ON position
。
At this moment, the LED power indicator shows: green
/ red blinking.
It means the transmitter has completed the e-Card reading
procedure.
4-1-3 Copy the e-Card
a)
Put a blank (or data can be overwritten) e-Card into
the transmitter.
b)
Turn the rotary switch (KEY) to START position
。
Green LED blinking
Write has been completed.
Red LED blinking
Write is failed; please repeat the
procedure from the beginning.
After the copy action is ending, Return the rotary key
switch (KEY) to OFF position.
4-2 Multiple e-Card copy procedure
4-2-1 and 4-2-2 Check and Read procedure are the same as the steps
above. (4-1-1, 4-1-2)
4-2-3 Multiple e-Card copy
a)
Put a blank (or data can be overwritten) e-Card into
the transmitter.
b)
Turn the rotary switch (KEY) to START position
。
Green LED blinking
Write has been completed.
Back to Green/ Red LED blinking
Ready to proceed
next e-Card copying.
After the copy action is ending, Return the rotary key
switch (KEY) to OFF position.
Keep the top two buttons,
press and hold.
