54
www.behnke-online.de
GB
Commissioning and configuration
Instructions for Behnke 20-0001B-IP, 20-0014B-IP, 20-0016B-IP
D
once for intercom station group 1
twice for intercom station group 2
:
9 times for intercom station group 9
After selecting the operating mode or the inter-
com station group, the settings made are
saved. After that, these settings can no longer
be changed via the
configuration key, unless the device is reset to
factory settings
reset.
Changing the selected settings via the web
interface or configuration mode is always
possible.
This function is only possible with a Behnke
in-house remote station of the latest genera-
tion.
Your SIP intercom station is now ready for fur-
ther commissioning. Further information about
the SIP intercom station, such as the IP address,
can be obtained via the configuration key,
see
point 5 Configuration key for an already config-
ured device.
.
4
Configuration of the SIP intercom station via
its web interface
To enter the web interface, enter the IP address
of the device in the address line
of your web browser.
IP address is announced during initial startup
(see Configuration of a SIP intercom station in
delivery state) or can be queried for SIP inter-
com stations already in operation as described
in point 5.
By default, the administrator password is
admin
!
For further information on the configuration and
commissioning of your SIP intercom station,
please refer to ? of the corresponding settings
as described above or to the technical manual
which can be found in the web interface of the
SIP intercom station.
5
Configuration key for an already configured
device
SIP intercom is started and ready for opera-
tion. Press configuration once. Options are
announced.
Announce IP address: Press twice
Start/exit the network configuration mode:
Press 3 times.
If access to the SIP station in the network is no
longer possible, an attempt is made to obtain
an IP address via DHCP by starting this function.
