45
www.behnke-online.de
GB
Mounting
Instructions for Behnke 20-0001B-IP, 20-0014B-IP, 20-0016B-IP
3
Fix modules in frame by means of module
housing
Fasten modules in the frame by means of
module housing. For frames that are larger
than their basic electronics, e.g. for the instal-
lation of special modules such as the Behnke
key switch module, Behnke key code panel
or similar, additional open counter plates are
required. For example, an additional counter
plate 20-4908 is required for a 3-fold frame
in conjunction with 2-fold basic electronics
(20-0014B-IP). It is essential to check this in
advance and only use suitable counter plates.
For locally remote mounting, with the
20-0016B-IP basic electronics, an open counter
plate of a size suitable for the frame used
is always required. No module housing is
included in the scope of delivery for the locally
detached basic electronics (20-0016B-IP).
M 2.5 x 4 mm countersunk screws. Included in
the screws accessory kit. Also included in the
kit: 2.5 mm allen key, 4 pcs. M 4 x 20 mm allen
screws to mount the door intercom station into
the Behnke AP housing, the Behnke UP housing
or the Behnke standing columns.
