Teleco TIG3000B, Руководство по установке

Страница: 8 / 36

8
■
Connection of auxiliary inputs and outputs (optional)
The HUB places 2 inputs and 2 outputs at the user’s disposal to control
camper equipment/devices.
For example, the inputs could be used to monitor the water and waste water
tanks (Tank full? Tank empty?), or to check if the door and the skylight/
ventilation port are open or closed.
The outputs could be used to switch the lights on and off or to command
unlocking of the camper.
Inputs: 2 digital channels (internal voltage 12 Volt)
1) Connect the IN1 wires of the Auxiliary Input Lead to the
first input you wish to control.
2) Connect the IN2 wires of the Auxiliary Input Lead to the
ends of the second input you wish to control.
Outputs: 2 10A 250 V AC / 30 V DC relays
Common (COM.), Normally Closed (N.C.) and Normally
Open (N.O) contacts are available for every output
1) Use the Auxiliary Output Lead to carry out
connections on the basis of the equipment to be
controlled.
Example:
Magnetic contact for
doors and windows
Example:
Water tank level
indicator
Example: Door lock
Example: Light
Note: IN1- and IN 2- are internally connected to the negative pole of the control center power supply.