17
Note
on deletion of Apple
iOS smartphones:
the Apple iOS operating system requires that deletion be effected on both
the HUB and on the smartphone, otherwise it will not be possible to repeat
its pairing. To delete the pairing on the smartphone go to the iOS “Bluetooth
settings” and remove “TelecoHUB (XXXX)” from the “MY DEVICES” list
(press
, and then “disassociate this device”).
Consult, if necessary, the smartphone instructions.
This procedure does not regard Android smartphones: their pairing can be
repeated immediately.
Make sure
you insert the card
in the special guide with the
contacts facing downwards.
To remove the Micro-SIM card
press it again.
Note:
the HUB can also be used
without a Micro-SIM; this limits
usage to Bluetooth connection
in the immediate vicinity (range
about 10 metres).
■
GSM connection
For GSM communication a Micro-SIM card with its own phone number and
sufficient credit is needed. The Micro-SIM card is not included.
Equipment is controlled via SMS (text) messaging.
Warning:
the TelecoHUB App automatically creates the messages with
the commands to be sent (e.g. “Close Antenna Sat (50030)”): to ensure
communication is completed successfully, send the message without
modifying recipient or message text.
●
Inserting and removing the Micro-SIM card
Insert the Micro-SIM card in the «SIM CARD» slot as illustrated in the figure
below until it clicks into place.
Содержание TIG3000B
Страница 1: ...TELECO HUB I N S T A L L A T I O N G U I D E A N D U S E R M A N U A L GB...
Страница 36: ...36...
