A C C E S S 2 4 1 - F X O / 2 4 1 / 2 1 1 / 2 1 1 N V O I P G A T E W A Y U S E R G U I D E
MN100129 Rev E
25
Wall-Mounting the Gateway Unit
In order to mount the unit on the wall, use two wood screws 6.1” (15.5 cm) apart for horizontal
positioning or 2.68” (6.8 cm) apart for vertical positioning. Use screws as specified below. Holes
for mounting on the wall are situated at the bottom of the unit, as shown in the following figure.
Clasp for fastening DC
power-feed cable
Mounting Screws Maximum Dimensions
Head diamete r (H):
Max 9 mm (0.35")
Shank diameter (S):
Max 3.5 mm (0.138")
Length (L):
25-30 mm (1"-1.2")
NOTE
The Access 211N is usually situated on the desk top.
Distance for horizontal
hanging = 6.1” ( 15.5 cm)
Distance for horizontal
hanging = 6.1” ( 15.5 cm)
Distance for vertical hanging
= 2.68” ( 6.8 cm)
S
H
L
