Telair ENERGY 8012 GAS Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 32

Telair ENERGY 8012 GAS Скачать руководство пользователя страница 20

Energy 8012 G

Vers. 001

GB

20

hand so as to be sure it is put back in place
properly. Finally, tighten using the special
wrench at the right torque (see instructions on
the engine user and maintenance manual).

When assembling a new

spark plug, tighten by 1/2 turn after the spark
plug has compressed the sealing washer.
If you put back the old plug after having re-
moved it, tighten it by 1/4 turn after it has
compressed the sealing washer.

The spark plug must be

tightened  firmly.  A  badly  positioned  spark
plug  may  become  very  hot  and  damage  the
engine.

7.4.4   Voltage adjustment

At  the  time  of  testing,  the  generating  set  has
been  set  on  2800  rpm  so  that  the  right  voltage
can be obtained at the output terminals.
Any setting adjustment must be authorized by us
and anyway performed by skilled personnel.
Adjust  the  voltage  when  the  engine  is  hot,  no
load is present and the generating set is running
(Fig. 24 Ref. 1).

Turn the screw clockwise to increase the engine
revs and hence the voltage.
Turn the screw counter-clockwise to diminish the
engine revs and hence the voltage.

8 DISMANTLING

Should you have to dismantle the generating set,
refer to specialised shops.

9 FIRE-PREVENTION

In case of fire, never open the hood of the gener-
ating set and use only approved type fire extin-
guishers.

Never use water to put

out flames in the generating unit.

24

«
...
18
19
20
21
22
...
»

Содержание ENERGY 8012 GAS

































Отзывы:

Нет отзывов