Telair ENERGY 8012 GAS, Руководство по эксплуатации и инструкции по установке, Страница: 11 / 32

Vers. 001
Energy 8012 G
GB
11
4.7 Connection of Auxiliary cables
2 auxiliary cables are to be connected, both are
provided with a polarized connector.
•
A 5 m long cable is delivered standard for
connection from the generating set to the
control panel. Make sure it is long enough for
the selected path from the generating set to
the control panel. Longer cables are available
as an option. See also paragraph 4.8. Let
the cable through the cable holder (Fig. 8
Ref. 1) and connect the white connector (ob-
serve proper fitting side) to the fixed connec-
tor (fig. 10 Ref. 3) which is located inside the
generating set over the fuses.
•
A cable is delivered standard together with
the generating set for connection from the
generating set to the pressure reducer. It is
already connected to the pressure reducer.
Let the cable through the cable holder (Fig. 8
Ref. 1) and connect the 3-pole white connec-
tor to the fixed connector (Fig. 10 Ref. 2)
which is located inside the generating set
near the 12 Vdc terminals.
4.8 Electronic control panel connection
Choose the position you want inside the vehicle
and make a rectangular hole sized 30 x 32 mm.
Let the connection cable coming from the gener-
ating set out of the hole (paragraph 4.7) and
connect the black connector of the cable on the
back of the electronic control panel. Fasten the
electronic control panel (Fig. 11) using self-
tapping screws sized 3 x 20 mm, and make sure
that the rear part does not touch other surfaces;
use slight pressure to fasten the plastic frame un-
til you hear the click of the fastening tabs.
10
11