Telair ENERGY 8012 GAS, Руководство по эксплуатации и инструкции по установке, Страница: 13 / 32

Vers. 001
Energy 8012 G
GB
13
Ref. 2) in the tail part of the muffler (Fig. 15 Ref.
1), drill a little hole on the muffler tail part, so as
to put a self-tapping screw to fasten the fitting on
the muffler tail part (Fig. 16 Ref. 2)
Then insert the flexible hose coded 00433 (Fig.
16 Ref. 5) on the fitting (Fig. 16 Ref. 3)
Fasten the hose by means of the clamp coded
00543 (Fig. 16 Ref. 4).
Fasten the flexible hose (Fig. 17 Ref. 2) to the tail
part of the muffler on the inlet side (Fig. 17 Ref.
1) using the other specially-provided clamp (Fig.
17 Ref. 3).
Put the parts of the flame trap in place again (Fig.
18 Ref. 2 – 3 – 4 – 5) on the tail part of the muf-
fler. Use the bracket welded on the muffler to fas-
ten the latter in any spot where there are no elec-
tric cables or fuel pipes.
Use only mufflers supplied
by . Mufflers of unsuitable size could
damage the engine.
18
17
16