www.tekvox.com
4K PTZ Camera
79068-4K-12 User Manual
Auto white balance sensitivity: sensitivity Auto white balance settings (default is low, high, medium
optional).
Chroma: Set the chroma (default 7, 0-14 optional).
White balance sensitivity: Set the white balance sensitivity (Default setting: High; with low and
middle for options)
Red gain: set the red gain, effective when it is manual (default 145, 0-255 optional).
Blue gain: sets the Blue gain, effective when it is manual (default 56, 0-255 optional).
Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and
Vertical Flip can be set.
Brightness: set the brightness (default 7; 0-14 optional).
Contrast: set the contrast (default 7; 0-14 optional).
Sharpness: Set the sharpness value (default 6; 0-15 optional).
Black and white mode: Set black and white mode (default color; black/white optional).
Gamma: gamma value setting (default; 0.45, 0.50, 0.55, 0.63 optional).
Dynamic contrast: set the dynamic contrast (default off; 1~8 optional)
Flip horizontal: set Flip Horizontal (default Off; On optional).
Flip vertical: set vertical flip (default Off; On optional).
Electronic zoom: set the electronic zoom (default Off; On optional)
Noise reduction: 2D noise reduction, 3D noise reduction and dynamic dead pixel correction
available.
2D noise reduction: set 2D noise reduction level (default 3; Auto 1-7 and Off optional).
3D noise reduction: set 3D noise reduction level (default 5; 1-8 and Off optional).
Dynamic dead pixel correction: set Dynamic dead pixel correction (default Off; 1-5 optional).
Note: Click “Refresh” to make revision of any video parameters of a, b, c, d, e effective.
4) Character-Overlapping
Display date and time: set whether to display the time and date (default display).
Display title: set whether to display the title (default display).
Font color of time: set font color of time and date (default white, black, yellow, red, and blue
optional).
Font color of title: set font color of title (default white; black, yellow, red, and blue optional).
Moving characters: set the display position of moving date, time and title, click on the "up, down, left,
right" buttons to move the corresponding character position.
Title content: set title content (default CAMERA1).
Time content: set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message.
5) Character Size
Main stream character size: set the character size of the display, then the device will restart.
