Tektronix TDS5032, Руководство пользователя

Страница: 159 / 248

R-GPIB Commands
About the R-GPIB Program
An example of an R-GPIB program that can execute the TDSUSB2 measurement
is included with the application. The oscilloscope hard disk and optional
applications compact disc both contain the file, TDSUSB2_rgpib.c. On the hard
drive, the file resides in the C:\Program Files\TekApplications\tdsusb2 directory.
This example shows how an R-GPIB program executes the application to do the
following tasks:
1. Start up the application
2. Recall High Speed Signal Quality setup
3. Run the measurement
4. Generate the reports
5. Exit the application
R-GPIB Reference Materials
To use the R-GPIB commands with your oscilloscope, refer to the following
materials:
The TDSUSB2_rgpib.c file on the oscilloscope hard drive (located in the
(located in the C:\Program Files\TekApplications\tdsusb2 directory) and
optional application compact disc for an example of an R-GPIB command
that can execute the application.
The R-GPIB Program Example section for guidelines to use while designing
the R-GPIB program.
The programmer information is in the online help of your oscilloscope.
TDSUSB2 Universal Serial Bus Measurement Package
145