150
Cursors Menu
Use the Cursors menu options to select cursor types, mode, and position, and also to turn cursors
on and off.
Cursor Setup Control Window
Access this control window from the Setup button on the Cursor Type Setup control window, or by
clicking the Cursor Setup command on the Cursors menu.
Overview
Use these controls to set the cursor parameters.
To Use
Click Cursor in the control window to turn cursors on and off. Select a cursor type by clicking one
of the Cursor Type buttons. Select the waveform you want to measure from the Source drop-down
list. Cursor 1 and Cursor 2 each have their own source.
If are using H-Bar or V-Bar Cursors and want the cursor source to be the same for both cursors,
just set the source for Cursor 1. Cursor 2 will have the same value as Cursor 1, unless you change
it.
Click the Cursor Positions controls to map the cursors to the multipurpose knobs, then use the
knobs to move the cursors. To select the cursor mode, click either the Indep (independent) or
Tracking button. Select a Line Style from the drop-down list. Line styles are available for all
cursor types. Select a Symbol Style from the drop-down list. Symbol styles are only available on
Waveform and Screen cursors.
If you are using XY display format you can also select the XY Cursor Readout from the drop-
down list. Only Waveform and Screen cursors are available in XY display format.
The Cursors menu
Cursors
On
command can also be used to toggle the cursors on and off. The
cursors are on when a check mark appears next to this command.
Содержание TDS5000B Series
Страница 36: ...36 AFTDS Differential Signal Adapter...
Страница 280: ...280 Blackman Harris window...
