Connecting the Probe
Connecting to Oscilloscopes with
the TekVPI Interface
You can also use the probe with oscilloscopes
that use the Tektronix TekVPI interface, using
the optional TPA-BNC Adapter shown.
The adapter allows TekVPI-interface
oscilloscopes to recognize TekProbe-interface
probes and to supply the necessary power,
serial communication, and offset control to the
probe.
1.
Connect the TPA-BNC adapter to the
oscilloscope. The adapter snaps in when
fully engaged.
2.
Connect the probe to the input of the
adapter.
3.
Turn the probe connector clockwise to
secure it.
TCP202A Current Probe Instruction Manual
3
Содержание TCP202A
