Tektronix Phaser 840, Руководство по обслуживанию

Страница: 59 / 207

48
Phaser 840 and 850 Color Printers
2. More than one sheet in
duplex path a. Media was pulled from
exit into duplex while
printing
b. Multiple pick
a. Empty exit tray
b. Retry
3. Media is from lower
feeder and has small left
margin a. Lower feeder bias
problem
b. Make sure media is
flush with the left side of
the tray
4. Stiff media a. Can't turn corner form
paper tray to drum
b. Run lighter media
(< 32#)
22,541.05 Unexpected right width sensor (A/A4 sensor) event *** Same as 22,511.02
***
22,542.17 Time-out on preheat exit sensor (duplex). Unexpected duplex sensor event
*** Same as 22,512.14 ***
22,548.03 Duplex long declaration determined from duplex sensor
1. More than one sheet in
duplex path a. Media was pulled from
exit into duplex while
printing
b. Multiple pick
a. Empty exit bin
b. Retry
22,600.01 Command stop event with media in exit cover area *** See SF144 ***
1. Media perfect in media
path (exit door area) a. Drum maintenance
clutch
b. PostScript fault
c. Front panel error
d. Power supply problem
a. Replace the drum
maintenance clutch
b. Try again, cycle power,
or NVRAM reset
c. Replace front panel
assembly
d. Replace power supply
22,601.02 Unexpected Lower-tray-present-sensor event in Lower Feeder 2 with
media in the exit door area *** Same as 22,101.06 ***
22,603.04 Unexpected Lower-tray-present-sensor event in Lower Feeder 1 with
media in the exit door area *** Same as 22,101.06 ***
22,605.05 Unexpected standard-tray-sensor event with media in exit door area ***
Same as 22,105.01 ***
22,614.06 Unexpected duplex-sensor event *** Same as 22,514.05 ***
22,638.14 Time-out on preheat-exit sensor (duplex) with media in exit cover
1. More than one sheet of
paper in path a. Media was pulled from
exit into duplex while
printing
a. Multiple pick
a. Empty exit
b. Run again
Error code
Additional clues Probable cause Action