Tektronix Phaser 840, Руководство по обслуживанию

Страница: 50 / 207

Service Guide
39
9,000: Ink loader: ink melters and printhead ink-level sensors.
9,001.45:
IL_FAULT_C_
TWANGER Malfunction of the ink-level sensor in the cyan reservoir.
Replace the printhead.
9,002.46:
IL_FAULT_M_
TWANGER Malfunction of the ink-level sensor in the magenta
reservoir. Replace the printhead.
9,003.47:
IL_FAULT_Y_
TWANGER Malfunction of the ink-level sensor in the yellow reservoir.
Replace the printhead.
9,004.48:
IL_FAULT_K_
TWANGER Malfunction of the ink-level sensor in the black reservoir.
Replace the printhead.
9,005.40:
IL_FAULT_C_JAM The cyan ink-melt heater is on, but ink does not seem to be
dripping. Check that the ink stick is able to advance in the
chute. An ink stick jam will be reported three times before
an ink-melter fault is declared. Replace the ink loader. If
the problem persists, replace the power supply.
9,006.41 and
9,069.41:
IL_FAULT_M_JAM The magenta ink-melt heater is on, but ink does not seem
to be dripping. Check that the ink stick is able to advance
in the chute. An ink stick jam will be reported three times
before an ink-melter fault is declared. Replace the ink
loader. If the problem persists, replace the power supply.
9,007.42 and
9,037.42:
IL_FAULT_Y_JAM The yellow ink-melt heater is on, but ink does not seem to
be dripping. Check that the ink stick is able to advance in
the chute. An ink stick jam will be reported three times
before an ink-melter fault is declared. Replace the ink
loader. If the problem persists, replace the power supply.
9,008.43 and
9,101:43
IL_FAULT_K_JAM The black ink-melt heater is on, but ink does not seem to
be dripping. Check that the ink stick is able to advance in
the chute. An ink stick jam will be reported three times
before an ink-melter fault is declared. Replace the ink
loader. If the problem persists, replace the power supply.
11,000:DMC
11,011.61 DMC event parameter block not found. The DMC library
was attempting to locate an event parameter block in its
linked list. The block was not found.
11,020.61 DMC event parameter block not found. The DMC library
was attempting to locate a timer parameter block in its
linked list. The block was not found.
Table 4 Front panel and fault history log error codes and messages
Error code Meaning