Tektronix Phaser 540 Plus, Руководство пользователя

Страница: 186 / 196

D
Regulatory Information
D-8
Phaser 540 Color Printer
MSDS for silicone oil
Section I – Product identification
Trade name and Tektronix part number:
Silicone Fluid
006-7959-00
Product use: Used in Tektronix Phaser 540 color printers.
Section II – Information on ingredients
Hazardous Ingredients: None. This is not a hazardous material as defined
by the OSHA Hazard Communication Standard.
Section III – Hazards identification
Potential Health Effects:
Eyes: Direct contact may cause temporary discomfort.
Skin: A prolonged exposure may cause slight irritation.
Inhalation: Not an irritant to respiratory passages.
Ingestion: Swallowing a large amount could cause discomfort.
Section IV – First aid measures
Eyes: Flush immediately with water.
Skin: Wipe off and wash with soap and water.
Inhalation: Not a likely route of exposure.
Oral: No first aid should be needed.
Section V – Fire fighting measures
Flammable Properties: Flammable limits not determined.
Flash point:
570
°
F, minimum open cup.
Fire & explosion hazards:
No unusual hazards known.
Ingredients
Polydimethylsiloxane