Tektronix MTX100, Руководство пользователя

Страница: 77 / 254

Using the Menus
MTX100 MPEG Recorder & Player User Manual
3Ć17
The Univ I/F menu is displayed when the universal parallel/serial interface
option is installed. This menu contains commands for setting the output signal
level, output format, and polarity of the clock signal. Table 3-5 describes the
commands available in the Univ I/F menu.
Table 3Ć5: Univ I/F menu commands (Play screen)Ă
Command Description
Level Sets the signal level for the UNIVERSAL IN/OUT connector. You can
select TTL, ECL, or LVDS.
Refer to
for more detailed electrical
characteristics.
Format Sets the output format for the UNIVERSAL IN/OUT connector. You can
select Parallel or Serial.
Clock Sets the polarity of the output clock signal. You can select Rise or Fall.
The BNC I/F menu is displayed when the BNC interface option is installed. This
menu contains commands for setting the output signal level and polarity of the
clock signal. Table 3-6 describes the commands available in the BNC I/F menu.
Table 3Ć6: BNC I/F menu commands (Play screen)Ă
Command Description
Level Sets the signal level for the BNC I/F connector. You can select TTL or
ECL.
Refer to
for more detailed electrical
characteristics.
Clock Sets the polarity of the signal output from the CLOCK connector. You
can select Rise or Fall.
The DHEI I/F menu is displayed when the DHEI interface option is installed.
This menu contains command for setting an output mode. Table 3-7 describes
the command available in the DHEI I/F menu.
Table 3Ć7: DHEI I/F menu command (Play screen)Ă
Command Description
Through Out Sets whether the signal supplied to the EXPANSION IN (OUT)
connector is output from the EXPANSION OUT (IN) connector when a
stream is not output. You can select On or Off.
Univ I/F Menu (Option 02
Only)
BNC I/F Menu (Option 03
Only)
DHEI I/F Menu (Option 04
Only)