manualshive.com logo in svg

Tektronix DG2020A, Руководство пользователя

Поделиться
Скачать
Tektronix DG2020A Скачать руководство пользователя страница 35

Getting Started

1Ć14

DG2020A, P3410, & P3420 User Manual

StartĆup Diagnostics

9. Check the results of the start-up diagnostics.

When the power is applied to this instrument, the start-up diagnostics are
automatically run. These diagnostics check whether the instrument is
performing within its defined operating characteristics.

If all the diagnostic items are completed without error, the system moves on
to the EDIT menu.

If an error is detected, Fail and the error code are displayed. You can exit this
state and operate this instrument, but until the error is corrected, the
instrument performance cannot be relied on. To exit the diagnostics system,
press any of the buttons. The system moves on to the EDIT menu.

If this instrument is exposed to temperatures outside its specified range, and the
chassis temperature is inappropriate, an error will occur during the diagnostics
when the power is switched on. If this happens, wait until the chassis tempera-
ture is appropriate, then switch the power on again.

. Contact your local Tektronix Field Office or representative if an error is

displayed.

Power Off

10. Press the ON/STBY switch.

Содержание DG2020A



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды