Tektronix DG2020A, Руководство пользователя

Страница: 104 / 258

Reference
DG2020A, P3410, & P3420 User Manual
3Ć3
Outlines for Pattern Data and Sequence Creations
You create and edit data pattern by using EDIT menu.
Here is a basic operation flow for creating a pattern data.
1. Set memory size with EDIT Settings Set memory size. In default, the
memory size is 1000 word.
2. Specify the work area with EDIT Execute Action Set Scope and
Width on the screen.
3. Create pattern data with the functions in EDIT Execute Action.
4. Repeat step 2 and 3 until the pattern data that you want is created.
Here is a basic operation flow for creating a sequence.
1. Create more than one block (pattern data delimited by block delimiter) on
the pattern memory as following steps:
a. Create first block pattern using the procedures described in Pattern Data
above.
b. Change the block name with EDIT Block Rename current
block.
c. Move the cursor to the next point to the end of the pattern data by
changing the value in the Cursor on the screen.
d. Mark the block delimiter with EDIT Block Add block delimiter
here. This causes to start new block. The block must has an unique
name, and you can enter it at this time or with the way of step b.
e. Create next block pattern using the procedures described in Pattern Data
above.
f. Repeat step c to e until all blocks you need are created.
2. Create sequence table as following steps:
a. Open the sequence editor with EDIT Make Sequence.
b. If you need, create sub-sequence(s) with EDIT Make Sequence
Special Edit Sub-Sequence New.
c. Compose the lines by inserting the blocks and/or sub-sequences with
EDIT
Make Sequence Insert.
Pattern Data
Sequence