Tektronix DG2020A, Руководство пользователя

Страница: 103 / 258

Reference
3Ć2
DG2020A, P3410, & P3420 User Manual
Operation Outlines
Figure 3-1 and Figure 3-1 show a typical example for operation flow from
creating and editing pattern data to outputting it.
Creating and editing pattern
data and/or sequence
Setting output parameters,
run mode and trigger
Outputting pattern data
Operations with the Edit
menu and front panel buttons
and knob.
Operations with the Setup menu
and front panel buttons and
knob.
Operations with the START/STOP,
STEP/EVENT and FORCE
TRIGGER buttons on the front
panel. Operations may also be
performed with external signals
coming from remote controller or
another equipments.
Figure 3Ć1: Operation flow for pattern data output #1
Creating and editing pattern
data and/or sequence
Setting output parameters,
run mode and trigger
Outputting pattern data
Created and edited pattern data
can be stored in a file together
with the setup information.
Operations with the Edit
menu and front panel buttons
and knob.
Operations with the Setup menu
and front panel buttons and
knob.
Operations with the START/STOP,
STEP/EVENT and FORCE
TRIGGER buttons on the front
panel. Operations may also be
performed with external signals
coming from remote controller or
another equipments.
As well as pattern data, the setup information is also
stored in the file. When you recall stored data from a
file, the DG2020A will also be set up. You can prepare
various data pattern to be used for inspecting facilities
and/or checking in production lines.
Pattern data acquired with logic analyzer or
oscilloscope can be imported to the DG2020A. They
are also used as test patterns for circuit designs.
Figure 3Ć2: Operation flow for pattern data output #2