TFP-40x Series Conventional Fire Alarm Panels
TFP-40X INSTALLATION & OPERATION MANUAL
7
Table 1 Auxiliary Buttons Functions
Label
Task
Short press
Long press
[F]
DISABLE
(<)
It is used to change the processed zone
when test or disable process is active in
Level-2. It shows the disable zones for
3 seconds when Level-1 and test or
disable process are deactivated.
It is used to turn on and off the
deactivation process in Level-2. In this
case, the fault statuses of the zones or
the siren are not shown. Only the disable
zones are shown.
[G]
ENTER
It is confirmed to carry out disable or
test processes at the selected
zone/siren when disable or test
processes are carried out.
It is used to show the details of the fault
statuses in Level-1.
[H]
TEST (>)
It is used to test the buzzer and the
LEDs in Level-1.
It is used to change the processed zone
or siren when disable process is active
in Level-2. Also, it is used to show the
tested zones and siren for 3 seconds
when test and disable processes are
deactivated.
It is used to show the zones and siren
being tested for 3 seconds in Level-1.
It is used to turn on and off the test
process in Level-2. In this case, it show
the zones and siren being tested.
Level 1 and 2 checks are carried out with a special key provided by the manufacturer company. It is not possible
to remove the key in Level 2.
Table 3 Level - 2 Key
Label
Task
[Y]
LEVEL-2
Key in vertical position; Keylock off; Level-1
Key in horizontal position; Keylock on; Level-2
Panel fault and alarm statuses are provided with LED indicators. An internal buzzer is available to provide audible
warning. LEDs and buzzer can be tested without transiting to any level.
